廈門緯軒機電設備有限公司座落于環境優美的廈門市區.公司以國內制造產業升級為契機,著眼于現代化的自動化工業生產裝備產業.以經營代理國內外知名DCS系統備件及工業自動化元件產品為主,以承接自動化項目軟/硬件研發設計,安裝調試,項目改造,元件技術服務為輔.真誠為奮斗在自動化工業發展進程中的每一位同仁服務.通過公司銷售與工程技術人員的真誠服務與不懈努力. 秉承”誠信經營互惠互利”的經營宗旨.成功為國內自動化貿易商,鋼鐵,電力,有色金屬,汽車制造等行業企業提供產品供應及技術支持服務.并贏得廣大客戶的青睞!    歡迎各界朋友來電來函咨詢公司產品及服務,我們將為您提供最周全的售前,售中,售后服務.實現彼此共贏!QQ3157966191
possible, but in case of a disproportionate high rpm faulty switching
signals are possible.
L/min (depending on adjustment and load)
3. Drive electric, pneumatic or manual option:
- Solenoid valve 3/2 way (up to 3 nozzles 120 Nl/min, 4 nozzles and over 1300 Nl/min) with auxiliary
actuation (for occasional manual switching on/off). Coil with plug in 24V DC, 24V AC, 110V AC or
230V AC. Cable bushing on left side of housing. In the case of separate actuation control device,
each pump (or group of pumps) is controlled via a dedicated solenoid valve.
- Pneumatic valve 3/2 way (up to 3 nozzles 550 Nl/min, 4 nozzles and over 1300 Nl/min). With push
in connection ?6 for control air on left outer side of housing.
- Hand valve 3/2 way (600 Nl/min) as valve rocker on right outer side of housing.
- Mechanical valves 3/2 way (700Nl/min) as plunger, roller lever or knee roller lever in versions NC
or NO. Delivered with the corresponding connectors and a 2m tube PUN?8 to the unit.
4. Feed tube
- Coaxial feed tube with EASY-COAX? system. Outer tube of strong
rubber construction with robust metal sleeve ?11, inner tube for
delivery of medium, constructed of long-life PTFE ?3. Standard
length 3,000, non-standard lengths up to 20,000 available on request.
Smallest bending radius R50.
- Numbering clips on feed tube for easy assignment of pumps and
nozzles.
Fig.2: Shaft and
stirring blade
rpm 0 – 12,000 min-1 at 6 bar (without load)
operating pressure 2.5 – 7.0 bar
air consumption max. 100 L/min at 6 bar (without load)
air consumption typical < 60 L/min (depending on adjustment and load)
Stirrer blade diameter ? 70 mm
Dimensions + 30 mm (added to the height of the reservoir)
Weight 1.5 kg
Fig.: EASY-COAX?
Fig.1: A6AWQp
Page 11
Lubrimat? L60
5. Nozzle option:
- Nozzle copper tube ?6 with EASY-COAX? system. Can be bent once, most suitable for rigid
positioning. Nozzle head with flow optimized construction for targeted, fogless spraying and nickel
plated protective sleeve ?8. Standard length 300, non-standard lengths in
increments of 50 can also be supplied. 2 clamps,
a connection block (40x30x15 with 2 fixing holes ?6)
or a connection block with round magnet ?80 can be
supplied for mounting, if required. Standard full jet,
also available as flat-jet (spray angle approx. 75°).
- Nozzle multi link tube ?17 with EASY-COAX?
system. Can be bent several times, particularly suitable for flexible
positioning. Nozzle head with flow optimized construction for targeted,
fogless spraying and nickel-plated protective sleeve ?8.
Standard length 300, non-standard lengths in increments of 50 can
also be supplied. A connection block (40x30x15 with 2 fixing holes ?6)
or a connection block with round magnet ?80 can be supplied for
mounting, if required. Standard full jet, also available as flat-jet (spray angle approx. 75°).
- Nozzle flexible metal tube ?9 with EASY-COAX? system. Can be bent several times, particularly
suitable for flexible positioning. Nozzle head with flow optimized construction for targeted, fogless
spraying and nickel-plated protective sleeve ?12. Standard length 340, but also available in 220
and 420. Connection block (40x30x15 with 2 fixing holes ?6) with or without round magnet ?80
can be supplied for mounting, if required.
- Nozzleblocks (Aluminium) with EASY-COAX? system. For 1, 2 or 3 feed tubes. With optimized
spray points for band saws or circular saws and elongated holes for mounting 6x18 or 6x21.
- Individual solutions like conical nozzles, incorporated nozzles or complete spraying devices on
demand.
General information about spray angle / spray distance / spray surface:
- Full jet nozzles have a spray angle of 20-25°, flat jet nozzles of 75°.
- In order to get an even covering of the surface*, the distance between the tip of the nozzle and
the surface must not be more than 150 mm.
- The size of the covered surface* can be calculated like follow (as thumbrule):
Full jet: Diameter of the surface* (b) = 1/3 of the distance nozzle to surface (a)
Flat jet: Length of the surface* (b)=1.5 x of the distance nozzle to surface (a)
* If the coverage of the surface will correspond to the ideal form shown here, will depend on the viscosity
and the surface tension of the media itself.
MFBR
GL
K
KK
KS1/2
BS1/3
BS2/2
Page 12
Lubrimat? L60
Order codes (Standard range, special solutions on request):
0. Base L60 MQL with piston pumps and precise metering control (PMC)
1. Base addition /..... (state number of nozzles required, e.g. ?/4“ )
/.....S (separate drive, all nozzles separately, e.g. ?/4S“ )
/.....S (separate drive, not all nozzles separately, e.g. ?/4S2+1+1“ )
2. Reservoir Y03 0.33-litre PA
P1 1.0-litre plexiglas / NBR
P2... as P1, but 2.0-litres
P3... as P1, but 3.0-litres
G1... as P1, but glass / FPM
G2... as P2, but glass / FPM
G3... as P3, but glass / FPM
A6AW 6.0-litre aluminium (wall installation) with wall bracket
A10AW... as A6AW, but 10-litre aluminium
A17AW... as A6AW, but 17-litre aluminium
A27AW... as A6AW, but 27-litre aluminium
A6AWG 6.0-litre aluminium (housing assembly) with wall-housing bracket
A10AWG... as A6AWG, but 10-litre aluminium
A17AWG... as A6AWG, but 17-litre aluminium
A27AWG... as A6AWG, but 27-litre aluminium
A.........Qp Stirrer, pneumatic
6. Option
- 4 x round magnet ?80 (mounted on the reverse side) for easy installation of the housing.
(see example on page 12).
- 4 x mounting straps (mounted on the reverse side) for fixed installation of the housing.
(see example on page 6).
- Filler reservoir 2.0-litre, fits into the filler neck (reservoir 1.0 litre and higher). This solution enables
you to fill in media of high viscosity more easily. You do not have to wait until the media is poured
in as its own weight makes the media flow faster through the sieve. In addition the filler reservoir
has a bigger opening ?. Dimensions: ?120 x 240 height.
Page 13
Lubrimat? L60
3. Drive e...V.. electric up to 3 nozzles (24VDC, 24VAC, 110VAC oder 230VAC)
E...V.. electric 4 nozzles and over (24VDC, 24VAC, 110VAC oder 230VAC)
pv3 pneumatic up to 3 nozzles
PV3 pneumatic 4 nozzles and over
M3SNC2000 mechanic plunger valve, NC, with tube 2,000mm
M3RNC2000 mechanic roller lever valve, NC, with tube 2,000mm
M3KNC2000 mechanic knee roller lever valve, NC, with tube 2,000mm
H3 hand actuated control device
4. Feed tube ZM3000 feed tube, metal outer ?11 / inner PTFE ?3, length (L)=3,000 (standard)
ZM........ feed tube, length =.... (non-standard length, min. 500, in increments of 500)
5. Nozzle K copper tube (?6, L=300)
KK copper tube (?6, L=300) with 2 clamps
KB copper tube (?6, L=300) with connection block
KBR copper tube (?6, L=300) with connection block and round magnet ?80
GL multi link tube (L=300)
GLB multi link tube (L=300) with connection block
GLBR multi link tube (L=300) with connection block and round magnet ?80
BS1/3 band saw nozzleblock for 1 feed tube/ with 3 spray points
BS2/2 band saw nozzleblock for 2 feed tubes/ with 2 spray points
BS3/3 band saw nozzleblock for 3 feed tubes/ with 3 spray points
KS1/2 circular saw nozzleblock for 1 feed tube/ with 2 spray points
KS2/2 circular saw nozzleblock for 2 feed tubes/ with 2 spray points
KS3/3 circular saw nozzleblock for 3 feed tubes/ with 3 spray points
(additional types and models also available))
6. Option RG housing mounting 4 x round magnet ?80
MG housing mounting 4 x mounting straps
L60/3 - P1NC - e24VDC - ZM3000 - GLBR - RG
0. Base 6. Option
1. Base addition
2. Reservoir 5. Nozzle
3. Drive 4. Feed tube
Sample order code:
UL 886
CSA C22.2 No. 25 & 30
UL 50
CERTIFICATIONSThe MSW-4424CS is positioned as a layer 2+ Gigabit access switch solution. It equips 20x 100Base-FX/1000Base-X dual speed SFP slots, 4x GbE combo (10/100/1000Base-T or 100/1000Base-X SFP) ports and 4x 1000Base-X/10GBase-X dual speed SFP+ uplink slots. The MSW-4424CS offers the best flexibility and scalability for the operators or service providers to deploy their Metro Ethernet netwo
Class I, Groups C,D
Class II, Groups E,F,G
TYPE 4
 4801 West 150th Street, Cleveland, Ohio 44135 TEL 216.267.9000 FAX 216.267.1681289
9
 82373215 密封膠\ULVA SEAL\400mL             密封膠\ULVA SEAL\400mL共采辦400L
 1,000.00
 件
 
10
 82373223 膠粘劑\ULVA BOND\1L 膠粘劑\ULVA BOND\1L共采辦400L