西門子數字量輸出模塊 SIPLUS SM 1222 信號模塊-焊材網資訊-歡迎光臨焊材網-chinahancai.com

今日最新資訊

熱門資訊

西門子數字量輸出模塊 SIPLUS SM 1222 信號模塊

發布者：上海勵輝自動化科技有限公司發布時間：2018-05-28 15:27:27 訪問次數：53

數字量輸出模塊 SIPLUS SM 1222 信號模塊

Overview

為 CPU 的集成 I/O 提供更多的數字量輸出
靈活地選擇控制器以滿足相應任務需要
用于使用附加輸出對系統進行后續擴展
+60 ℃ 到 +70 ℃，最多可同時控制輸入的 50%

注意：

SIPLUS extreme 產品是基于西門子工業標準產品的。此處列出的內容來自相關的標準產品。添加了特定 SIPLUS extreme 信息

Area of application

數字量輸出模塊允許將數字信號從控制器輸出到過程。

這為用戶提供了下列優勢：

最佳適應性：
使用可以根據需要混合的信號模塊，用戶可以使其控制器準確地滿足相關任務的要求。這可以避免產生不必要的投資。可以使用帶有 8 個、16 個和 32 個輸入/輸出通道的模塊。
靈活性：
如果任務后續有所擴展，可以升級控制器。更新用戶程序非常簡單。

--------------------------------------------------------------------------------------
上海勵輝自動化科技有限公司
Q Q：570137816 Q：470768998張
銷售服務熱線: 178-2136-0171鄭工
銷售服務熱線：178-2113-7598張工
E-mail： 570 137 816 @qq.com
--------------------------------------------------------------------------------------
上海勵輝集成/個人/采購商/和制造商/的最佳合作伙伴

西門子工控系統及設備，品牌:SIEMENS(西門子)各種高中低壓電器.全新原裝價格優勢質量保證

長期經營：
DP總線電纜接頭、PLC系列：S7-200、S7-200CN、S7-200Smart、S7-300、S7-400、S7-1200、S7-1500、觸摸屏、變頻器、伺服電機、S I T O P電源、電線電纜、數控系統、人機界面、軟啟動器、西門子軟件等等、
誠信經營、質量為本、愿交西門子工控系列產品長期合作伙伴!

Functions

SM 1222 數字量輸出信號模塊將 SIMATIC S7-1200 的內部信號電平轉換為過程所需的外部信號電平。

Technical Specifications

Order number	6AG1222-1BF32-2XB0	6AG1222-1BF32-4XB0	6AG1222-1BH32-2XB0	6AG1222-1BH32-4XB0
	SIPLUS S7-1200 SM 1222 8DQ	SIPLUS S7-1200 SM 1222 8DQ	SIPLUS S7-1200 SM 1222 16DQ	SIPLUS S7-1200 SM 1222 16DQ
Product type designation
Input current
from backplane bus 5 V DC, max.	120 mA	120 mA	140 mA	140 mA
Power loss
Power loss, typ.	1.5 W	1.5 W	2.5 W	2.5 W
Digital outputs
Number of digital outputs	8	8	16	16
● in groups of	1	1	1	1
short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Switching capacity of the outputs
● with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
● on lamp load, max.	5 W	5 W	5 W	5 W
Output voltage
● Rated ＆#118alue (DC)	24 V	24 V	24 V	24 V
● for signal "0", max.	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load
Output current
● for signal "1" rated ＆#118alue	0.5 A	0.5 A	0.5 A	0.5 A
● for signal "0" residual current, max.	10 μA	10 μA	10 μA	10 μA
Output delay with resistive load
● "0" to "1", max.	50 μs	50 μs	50 μs	50 μs
● "1" to "0", max.	200 μs	200 μs	200 μs	200 μs
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	4 A; Current per mass	4 A; Current per mass	8 A; Current per mass	8 A; Current per mass
Relay outputs
Switching capacity of contacts
— with inductive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
— on lamp load, max.	5 W	5 W	5 W	5 W
— with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms
● Alarms	Yes	Yes	Yes	Yes
● Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
● Diagnostic functions	Yes	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes	Yes	Yes
Diagnostics indication LED
● for status of the outputs	Yes	Yes	Yes	Yes
● for maintenance	Yes	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes
Potential separation digital outputs
● between the channels, in groups of	1	1	1	1
● between the channels and the backplane bus	500 V AC	500 V AC	500 V AC	500 V AC
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package
Ambient temperature during operation
● min.	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C
● max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C	70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Type of housing (front)
● plastic	Yes	Yes	Yes	Yes
Dimensions
Width	45 mm	45 mm	45 mm	45 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	180 g	180 g	220 g	220 g

Order number	6AG1222-1HF32-2XB0	6AG1222-1HF32-4XB0	6AG1222-1HH32-2XB0	6AG1222-1HH32-4XB0
	SIPLUS S7-1200 SM 1222 8DQ RLY	SIPLUS S7-1200 SM 1222 8DQ RLY	SIPLUS S7-1200 SM 1222 16DQ RLY	SIPLUS S7-1200 SM 1222 16DQ RLY
Product type designation
Supply voltage
permissible range, lower limit (DC)		20.4 V		20.4 V
permissible range, upper limit (DC)		28.8 V		28.8 V
Input current
from backplane bus 5 V DC, max.	120 mA	120 mA	135 mA	135 mA
Power loss
Power loss, typ.	4.5 W	4.5 W	8.5 W	8.5 W
Digital inputs
Number of digital inputs		0		0
Digital outputs
Number of digital outputs	8	8	16	16
● in groups of	2	2	1	1
short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Switching capacity of the outputs
● with resistive load, max.	2 A	2 A	2 A	2 A
● on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
Output voltage
● Rated ＆#118alue (DC)	5 V DC to 30 V DC	5 V DC to 30 V DC	5 V DC to 30 V DC	5 V DC to 30 V DC
● Rated ＆#118alue (AC)	5 V AC to 250 V AC	5 V AC to 250 V AC	5 V AC to 250 V AC	5 V AC to 250 V AC
Output current
● for signal "1" permissible range, max.	2 A	2 A	2 A	2 A
Output delay with resistive load
● "0" to "1", max.	10 ms	10 ms	10 ms	10 ms
● "1" to "0", max.	10 ms	10 ms	10 ms	10 ms
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	10 A; Current per mass	10 A; Current per mass	10 A; Current per mass	10 A; Current per mass
Relay outputs
● Number of relay outputs	8	8	16	16
● Rated supply voltage of relay coil L+ (DC)	24 V	24 V	24 V	24 V
● Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100,000	mechanically 10 million, at rated load voltage 100,000	mechanically 10 million, at rated load voltage 100,000	mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
— with inductive load, max.	2 A	2 A	2 A	2 A
— on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
— with resistive load, max.	2 A	2 A	2 A	2 A
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms
● Alarms	Yes	Yes	Yes	Yes
● Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
● Diagnostic functions	Yes	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes	Yes	Yes
Diagnostics indication LED
● for status of the outputs	Yes	Yes	Yes	Yes
● for maintenance	Yes	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes
Potential separation digital outputs
● between the channels	Relay, dry contact	Relay, dry contact	Relays	Relay, dry contact
● between the channels, in groups of	2	2	4	4
● between the channels and the backplane bus	1500 V AC for 1 minute	1500 V AC for 1 minute	1500 V AC for 1 minute	1500 V AC for 1 minute
Permissible potential difference
between different circuits	750 V AC for 1 minute	750 V AC for 1 minute	750 V AC for 1 minute	750 V AC for 1 minute
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package
Ambient temperature during operation
● min.	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C
● max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
● permissible temperature change	5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C	70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
● At cold restart, min.	-25 °C
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Type of housing (front)
● plastic	Yes	Yes	Yes	Yes
Dimensions
Width	45 mm	45 mm	45 mm	45 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	190 g	190 g	260 g	260 g

來源：上海勵輝自動化科技有限公司

免責聲明：焊材網轉載作品均注明出處，本網未注明出處和轉載的，是出于傳遞更多信息之目的，并不意味著贊同其觀點或證實其內容的真實性。如轉載作品侵犯作者署名權，或有其他諸如版權、肖像權、知識產權等方面的傷害，并非本網故意為之，在接到相關權利人通知后將立即加以更正。聯系電話：0571－87774297。